03 / Dry Chain Lubricant
Dry Vector
A wax-type lubricant for dry, dusty conditions, made to keep the drivetrain clean rather than collecting grit.
- Category
- Dry Chain Lubricant
- Pack size
- 120 mL dropper bottle
- Formulation
- Water-based or solvent-free wax lubricant
01
Overview
Dry Vector is for dry roads, summer gravel and dusty trails, where a wet lubricant would pick up grit and wear the drivetrain.
It is a water-based wax lubricant that sets on the chain. Reapply more often than you would a wet lubricant.
Designed for
- Dry and dusty conditions
- A clean drivetrain
- Riders who relube little and often
02
Application
- Start from a fully clean, degreased and dry chain. Wax lubricants bond poorly to old oil.
- Shake the bottle well before use.
- Apply one drop to each roller while backpedalling.
- Turn the cranks and shift through the gears.
- Leave it to set before riding.
03
Formulation
Formulation
Water-based or solvent-free wax lubricant
Full composition information is given in Section 3 of the Safety Data Sheet.
04
Documents
| Document | Ref. | Rev. | Date | Status | |
|---|---|---|---|---|---|
| Safety Data Sheet (GB, EN) | AX-SDS-03 | 0.1 | 29 Oct 2026 | Issued | PDF ↓ |
| Technical data sheet | AX-TDS-03 | 0.1 | 29 Oct 2026 | Issued | This page |